GuidesConvert negatives into photos
How to convert film negatives with your phone
To convert film negatives with your phone, lay the film on an even light, photograph each frame with the phone parallel to the film, in RAW if your phone can, and open the photos in a negative conversion app. The app inverts each frame, removes the orange mask of colour film and balances the colour. If you only want to look at a negative, turn on your phone’s invert colours setting and point the camera at it.
Three ways to see a negative as a photo
| Method | What you get | Use it for |
|---|---|---|
| Invert colours on the screen | A live preview. Nothing is saved, and colour film looks blue. | Checking a roll, choosing a frame to print |
| Invert in a photo editor | A positive, made by hand, one frame at a time | A few black and white frames |
| A negative conversion app | Finished photos for a whole roll, with the orange mask removed | Colour negatives, slides and whole rolls |
Preview a negative with invert colours
Your phone can show a negative as a positive on its screen, with no app to install.
iPhone and iPad:
- Go to Settings > Accessibility > Display & Text Size and turn on Classic Invert. Do not use Smart Invert: Apple says it leaves images and media as they are.
- Open the Camera app and point it at the negative on a light.
- To turn the setting on and off quickly, choose Classic Invert in Settings > Accessibility > Accessibility Shortcut. Then triple-click the side button (or the Home button).
Android: go to Settings > Accessibility > Color and motion > Color inversion, and turn on Use color inversion. The names of the menus vary between phone makers and Android versions.
A black and white negative looks like a flat black and white photo. A colour negative looks blue or cyan, because the orange mask of the film turns blue when you invert it. The setting changes only the screen: a photo you take is still a negative.
What you need
- A phone that saves RAW, if you have one. A RAW file keeps much more of the sensor’s data. A JPEG or HEIF photo has a tone curve and a white balance built in for a normal, positive scene, and the conversion must work against them. Apple ProRAW needs an iPhone 12 Pro or a later Pro model. Many Android phones save RAW (DNG) files in their pro or manual camera mode.
- An even light. Use a light pad larger than the frame, with a high colour rendering index (CRI). A phone or tablet screen shows its pixels in the photo unless you diffuse it.
- A film holder. It keeps the film flat and blocks the light around the frame. Without one, stray light makes the photos flat.
- A stand or a clamp that holds the phone still and parallel to the film.
- A negative conversion app. See what to look for below.
Photograph the negatives
The guide to scanning film with an iPhone explains the setup step by step. In short:
- Clean the film with an air blower and put it in the holder, shiny base side toward the phone.
- Hold the phone flat above the film and parallel to it. If the phone tilts, one side of the frame goes soft.
- Get close enough for the frame to fill most of the picture: use macro mode, the main camera or a clip-on macro lens.
- Leave a thin border of clear film around the frame. The app measures the orange mask on it, and you crop it off later.
- Tap the frame to focus. Make the picture as bright as you can without blowing out the clear film, then lock focus and exposure.
- Shoot every frame of the roll with the same lens, the same light and the same lock.
If you want the film border in the final photo, with the frame numbers or the sprocket holes, shoot the full width of the film and keep the border when you crop.
Why a “negative effect” app is not enough
Many apps with “negative” in their name only invert the colours, like a filter. That is fine for a quick look at black and white film. On colour negatives it fails, for three reasons:
- The orange mask. Colour negative film has an orange base. A plain inversion turns it into a strong blue cast over the whole picture.
- Each colour channel needs its own black and white points. The three dye layers of the film have different densities, so one curve cannot balance them.
- Contrast. A negative packs a long range of tones into a narrow range of density. A plain inversion gives a flat, grey photo.
A negative conversion app does the four steps of a conversion for you: invert, remove the orange mask, set black and white points for each channel, and apply a tone curve. The guide to converting film negatives explains each step.
What to look for in a phone app
- Modes for colour negative, black and white and slide film. Slides need no inversion.
- RAW support. The app must open the RAW or DNG files from your phone, or shoot RAW itself.
- Frame detection. It crops to the frame and levels it, so you do not crop every photo by hand.
- Settings for the whole roll. Fix one frame, then copy its settings to the others.
- Full-resolution export. A 16-bit TIFF for more edits, or a JPEG to share.
- No upload. Family negatives are private. Check whether the app converts on the phone or on a server.
- The price model. Some apps charge a subscription, others a one-time purchase. Check before you convert a whole archive.
FilmLab, for example, has apps for iOS and Android, and one licence also covers Mac and Windows. For more converters, with their platforms and prices, see negative conversion software compared.
Convert by hand in a photo editor
You can invert a black and white negative in any editor with a point curve, such as Lightroom on a phone. Drag the black end of the curve to the top and the white end to the bottom. After that, the other sliders work backwards: more exposure makes the photo darker.
A colour negative needs a curve for each colour channel, set on the film base. That is slow on a phone screen. The full method is in how to invert colour negatives in Photoshop. A conversion app does the same steps for you.
Phone or camera?
A phone is a good way to preview a roll, share a few frames or digitise a box of family negatives. A camera with a macro lens records more grain and fine detail, which matters for large prints. Both use the same light, holder and conversion, so you can start with the phone and move to a camera later. See how to scan film with a camera.
Common problems
- The photo is blue or cyan. The app or the editor inverted the picture but did not remove the orange mask. Use a colour negative mode, and keep some clear film in the picture for the app to measure. For a cast that stays, see colour casts in film scans.
- The frames of a roll look different. The phone changed the exposure, the white balance or the lens between shots. Lock focus and exposure, and keep the same lens.
- One side of the frame is soft. The phone is not parallel to the film.
- A grid or a pixel pattern. You used a screen as the light. Use a light pad, or diffuse the screen.
- A flat or noisy photo. The negative may be thin. See thin and dense negatives.
- Specks and hairs. Dust on the film or on the phone’s lens. Clean both, and see dust on film scans.